Declaration Of Conformity; Warranty Certificate (A Summary Of The Warranty Conditions) - EMAK DS 4000 S Manuel D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 48

13. DECLARATION OF CONFORMITY

The undersigned, Emak spa via Fermi, 4 - 42011 Bagnolo in
Piano (RE) ITALY declares under its own responsibility that
GB
the machine:
1. Category: brushcutter/grass trimmer
2. Brand Efco, Type DS 4000 S - DS 4000 T
Brand Oleo-Mac, Type BC 400 S - BC 400 T
3. Serial ID 856 XXX 0001 ÷ 856 XXX 9999 (DS 4000 S - BC 400
S) - 855 XXX 0001 ÷ 855 XXX 9999 (DS 4000 T - BC 400 T)
conforms to the requirements of Directives:
2006/42/CE - 2000/14/CE - 2014/30/EU - 97/68/CE - 2004/26/
CE, conforms to the provisions of the following harmonized
standards:
EN 55012 - EN ISO 11806
Procedures for evaluation of conformity followed:
Annex V - 2000/14/CE
14. WARRANTY CERTIFICATE
This machine has been designed and manufactured using the
most modern techniques. The manufacturer guarantees its
products for 24 months from the date of purchase, for private
and hobby use. The warranty is limited to 12 months in case
of professional use.
Limited warranty
1) The warranty period starts on the date of purchase. The
manufacturer, acting through the sales and technical
assistance network, shall replace free of charge any parts
p r o v e n d e f e c t i v e i n m a t e r i a l , m a c h i n i n g o r
manufacturing. The warranty does not affect the
purchaser's rights as established under legislation
governing the consequences of defects in the machine.
2) Technical personnel will undertake the necessary repairs
in the minimum time possible, compatible with
organisational needs.
3) To make any claim under the warranty, this certificate
of warranty, fully completed, bearing the dealer's
stamp and accompanied by the invoice or receipt
showing the date of purchase, must be displayed to
the personnel authorised to approve work.
4) The warranty shall be null and void if:
- the machine has evidently not been serviced correctly
MODEL
SERIAL No
BOUGHT BY Mr.
Do not send! Only attach to requests for technical warranties.
42
Measured sound power level: 114.5 dB (A)
Guaranteed sound power level: 116.0 dB (A)
Technical Documentation deposited with Administrative
Headquarter: Technical Department
Signed in Bagnolo in Piano (RE) Italy - via Fermi, 4
Date: 01/12/2017
- the machine has been used for improper purposes or has
been modified in any way,
- unsuitable lubricants and fuels have been used
- non-original spare parts and accessories have been fitted
- work has been done on the machine by unauthorised
personnel
5) The warranty does not cover consumables or parts
subject to normal wear.
6) The warranty does not cover work to update or improve
the machine.
7) The warranty does not cover any preparation or
servicing work required during the warranty period.
8) Damage incurred during transport must be immediately
brought to the attention of the carrier: failure to do so
shall render the warranty null and void.
9) Engines of other manufacturers (Briggs & Stratton,
Subaru, Honda, Kipor, Lombardini, Kohler, etc.) fitted to
our machines are covered by the warranties of the
engine manufacturer.
10) The warranty does not cover injury or damage caused
directly or indirectly to persons or things by defects in
the machine or by periods of extended disuse of the
machine resulting from the said defects.
DATE
DEALER
s.p.a.
Fausto Bellamico - President

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bc 400 sDs 4000 tBc 400 t

Table des Matières