Installation Options; Individual Unit; Individual Appliances With Partition; At The End Of The Kitchen Units - Bosch B36IT71SNS Instructions D'installation

Installation options

The different installation options are limited only by the design
of the kitchen and the function of the finger guard.

Individual unit

Individual appliances with partition

1.
2.
– When dimensioning the partition for model 2, note the
thickness of the furniture fronts to prevent damage if the
doors are opened at the same time.
– Use the Extreme Combination Side-by-Side Heating kit
if the gap between the appliances is less than 6"
(160 mm).
See the section on "Optional accessories".
– Minimum thickness of the partition
5
/ " (16 mm).
8

At the end of the kitchen units

If one side of the appliance is visible, a side panel must be
used.
The side panel must be connected firmly to the wall, the floor
and overhead furniture/fixtures before the appliance is placed
in the cavity.
The dimensions of the side panel are taken from the opposite
cavity wall. During installation ensure that the cavity is square
and the exact size.
5