Explanation Of Functions - Becker Centronic VarioControl VC520 Notice De Montage Et D'utilisation

Ensure that there is optimum radio reception.

Explanation of functions

Drive controller
If the radio receiver is used as a drive controller, the drive is connected directly
to the device. Radio commands are converted into drive commands. You can
operate a 230 V/50 Hz drive directly with a jumper between L and C.
Group controller (GC)
If the radio receiver is used as a group controller, other group controllers/drive
controllers can be operated. This control unit can forward radio commands.
This function allows you to connect groups and execute joint switching com-
mands. A jumper between L and the GC allows you to operate groups.
Blind ( )
A bridge between L and the encoder terminal allows you to operate the
radio receiver in touch mode. If you hold the travel button down for longer than
1 second, the blind travels in maintained operation. The running time is 180
seconds, instead of the 120 seconds for roller shutters.
25 - en