Connection As Group Controller - Becker Centronic VarioControl VC520 Notice De Montage Et D'utilisation

Connection as group controller

Caution
• Risk of injury due to electric shock.
• Connection may only be performed by a qualified electri-
cian!
•
The device only offers back-of-hand protection, not
touch protection.
•
Do not bend, shorten or lengthen the antenna.
•
Only operate the programming button with an insulated
tool.
• Always take into account the device switching current.
1. Connect the device as follows:
2. Program a transmitter into the receiver (see chapter "Programming the
transmitter")
3. Fasten the device in the socket.
24 - en
Central cable