Table Des Matières; Introduction - Husqvarna KLIPPO LB 448S Manuel D'utilisation

Introduction..................................................................... 7
Safety..............................................................................8
Assembly...................................................................... 11
Operation...................................................................... 11
Product description
The product is a pedestrian-controlled rotary lawn
mower that usesBioClip
Product overview
(Fig. 1)
1. Handle / handlebar
2. Engine brake handle
3. Drive lever
4. Starter rope handle
5. Oil cap
6. Belt guard
7. Muffler
8. Spark plug
9. Belt guard
10. Fuel tank
11. Lever for angle adjustment of the handle
12. Vibration damping system
13. Clutch wire adjustment
14. Lower handle
15. Cutting height lever
16. Fuel valve
17. Air filter
18. Cutting cover
19. Spring washer
20. Blade bolt
21. Blade
22. Blade support
23. Mulch plug (KLIPPO LB 448S, KLIPPO LB 548S e)
24. Operator's manual
Symbols on the product
(Fig. 2)
WARNING: Careless or incorrect use can
result in injury or death to the operator or
others.
(Fig. 3) Please read the operator's manual
carefully and make sure that you
understand the instructions before use.
(Fig. 4) Look out for thrown objects and ricochets.
1509 - 004 - 15.10.2020
®
to cut the grass into fertilizer.
Contents
Maintenance................................................................. 12
Transportation, storage and disposal........................... 15
Technical data.............................................................. 16
EC Declaration of Conformity....................................... 18

Introduction

Intended use
Use the product to cut grass. Do not use the product for
other tasks.
(Fig. 5)
(Fig. 6)
(Fig. 7)
(Fig. 8)
(Fig. 9)
(Fig. 10)
(Fig. 11)
Note:
Other symbols/decals on the product refer to
certification requirements for some commercial areas.
Decal on the product, for Australia and
New Zealand only
(Fig. 12)
Keep hands and feet away from the rotating blade.
Keep persons and animals at a safe
distance from the work area.
Stop the engine and remove the ignition
cable before repairs or maintenance.
Warning: Keep hands and feet away from
rotating parts.
Warning: Keep hands and feet away from
the rotating blade.
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to European Directive
2000/14/EC and New South Wales
legislation "Protection of the Environment
Operations (Noise Control) Regulation
2017". Noise emission data can be found
on the machine label and in the Technical
data chapter.
Scannable code.
7