Appendix B - Output Code Format; Rs232, Rs485, Rs422 Cards - Gorgy Timing LEDI Mode D'emploi

This appendix contains a description of the time code used for the different kind of
outputs.

1. RS232, RS485, RS422 CaRDS

The default configuration is shown below:
► The ASCII frame is a 23 characters frame with following format:
STX D A Y
Here is a description of the different fields of this frame:
Field Size
STX 1 A single byte which value is 2 – mark the beginning of the frame.
The day in the week in a human-readable way (MON for Monday, TUE for
DAY 3 Tuesday, WED for Wednesday, THU for Thursday, FRI for Friday, SAT for
Saturday, SUN for Sunday
DD 2 Day in the month on two characters ASCII (01-31)
MM 2 Month in the year on two characters ASCII (01-12)
YY 2 Year on two characters ASCII (00 for 2000 – 99 for 2099)
HH 2 Hours on two characters ASCII (00 to 23)
MM 2 Minutes on two characters ASCII (00 to 59)
SS 2 Seconds on two characters ASCII (00 to 59)
CR 1 A single byte which value is 13decimal – mark the end of the frame
MDE-LEDInetworkITS-server-4078V1.3
aPPENDIx
D D / M M /
B – OUTPUT CODE fORMaT
Y Y H H :
Value/Meaning
M M : S S CR
105