Olsberg Tellus Aqua plus Mode D'emploi page 33

Example: setting the desired P performance
•
Push both the arrow buttons
ously. The message MENU SET WORK ap-
pears on the display.
•
In order to enter into the menu, press the ON
button.
•
Select the paramater P with ON.
•
If the parameter is blinking, it can be set by using
the + buttons.
•
To confirm, press the ON button.
To exit the menu:
•
Press the OFF button to exit the menu.
•
Press the OFF button to exit the SET STOVE
menu.
10.3 TIMER Menu
This menu is used to set the automatic start up and
shut down times for the unit. 6 programs can be set
day by day. Desired room temperatures of 10 – 30°C
or desired buffer temperatures of 55 – 85°C can also
be programmed along with the programmed heating
times. If no room temperature is programmed, the
room temperature listed in SET WORK will be acti-
vated.
•
Press both arrow buttons
simultaneously.
The message MENÜ SET WORK appears in the
display.
•
Press the button.
The message TIMER appears in the display.
•
In order to enter into the menu, press the ON
button.
•
By pressing the arrow buttons on the right the
programs P1 to P6 can be selected.
•
Press the ON button = first parameter is blinking.
•
With the or , select ON or OFF, or the de-
sired room temperature between 10 – 30 °C (with
BUFFER ON, select the desired water tempera-
ture in the buffer between 55 – 85°C), and con-
firm with ON.
•
Select START TIME and STOP TIME with ON,
and set the exact time with the arrow buttons.
•
Select the weekday with ON and, by using the
arrow buttons, activate the programmed switch-
ing times.
A filled-in circle appears in the display next to the
weekday after activation.
To exit the menu:
•
Press the OFF button to exit the menu.
•
Press the OFF button to exit the SET STOVE
menu.
+ simultane-
+
It is possible to select OFF instead of an exact time
for the start up and shutdown times (it comes after
the setting for 00:00 or 23:50). If OFF is entered as
the start up time, the unit does not switch on. If OFF
is entered as a shutdown time, the unit does not
switch off.
This option is useful, if you only wish to enter just
start up or shut down times.
10.4 Menu SET STOVE
In the SET STOVE menu, parameters can be adjust-
ed in the following submenus.
10.4.1 TIME
Setting the day of the week and the current time
•
Press the two arrow buttons
same time.
The message MENU SET WORK appears on the
display.
•
P Press the
The message SET STOVE appears on the dis-
play.
•
Press the ON button to enter the menu.
•
Press ON to arrive at the settings.
The current setting for the day of the week will
flash.
•
Use or
•
Press ON to confirm and to jump to the next pa-
rameter.
To exit the menu:
•
Press the OFF button to exit the TIME menu.
•
Press the OFF button to exit the SET STOVE
menu.
10.4.2 DATE
Setting the current date
•
Press the two arrow buttons
same time.
The message MENU SET WORK appears on the
display.
•
Press the
The message SET STOVE appears on the dis-
play.
•
Press the ON button to get into the menu.
•
Select DATE by pressing
or .
•
Press ON to get to the settings.
The current setting for the date will flash.
•
Use or
•
Press ON to confirm and to jump to the next pa-
rameter.
33
+
button 2 times.
to change the day of the week.
+
button 2 times.
to change the date.
at the
at the