McCulloch CS 35 Manuel D'utilisation page 6

Masquer les pouces Voir aussi pour CS 35:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 117
Symbols on the machine:
WARNING! Chain saws can be
dangerous! Careless or incorrect use can
result in serious or fatal injury to the
operator or others.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
Approved protective helmet
Approved hearing protection
Protective goggles or a visor
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to the European
Community's Directive. The machine's
emission is specified in the Technical
data chapter and on the label.
Both of the operator's hands must be
used to operate the chain saw.
Never operate a chain saw holding it
with one hand only.
Contact of the guide bar tip with any
object must be avoided.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning fast
reverse reaction, kicking the guide bar
up and towards the operator. May
cause serious personal injury.
The engine is stopped by switching the
ignition off using the stop switch.
6 – English
INTR ODUCTION
Chain brake, activated (front)
Chain brake, not activated (back)
Air purge
Refuelling.
Chain oil fill.
The rating plate
showing serial number.
yyyy is the production
year, ww is the
productionweek and
xxxxx is the sequential
number.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
yyyywwxxxxx

Hide quick links:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cs 35s

Table des Matières