Makita DUM604 Manuel D'instruction page 10

Removing the shear blades
1. Remove the grass receiver and place the tool
upside down.
2. While pressing the lock lever, turn the undercover
counterclockwise until
with on the lock lever.
3.
Remove the undercover, shear blades, and crank.
► 1 . Undercover 2. Shear blades 3. Crank
on the undercover is aligned
1
2
3
Installing the shear blades
1. Prepare the crank, undercover, and new shear
blades.
1
► 1 . Crank 2. Undercover 3. Shear blades
2. Remove the blade cover from the old shear
blades, and then attach it to the new ones.
3.
Adjust the three pins so that they are lined up on
the alignment line.
► 1 . Alignment line
10 ENGLISH
2 3
1