Disposal; Disposal Of Your Old Appliance; Customer Service; Model Number (E-Nr.) And Production Number (Fd) - Bosch NETP669SUC Manuel D'utilisation

Issue
and cooking zones do not heat
up
A message with "D" or "E" appears
on the display.
7.1 Normal behavior of your appliance
The following behavior is normal and does not constitute a
malfunction or issue.
Behavior Cause
The reddish glow of The cooktop regulates the cook-
the heat source ap- ing zone temperature by turning
pears uneven. the heat source on and off. This
means that the reddish glow of
the heat source beneath the
cooking zone may not always be
visible. If you select a low power
level, the heat source is fre-
quently off; at higher settings it is
seldom off. The source turns on
and off even at the highest set-
tings.
The cooktop makes a You may hear a quiet hum when
quiet humming sound the heating elements are in the
during the heating heating phase. The heating ele-
phase. ments may glow with different
levels of brightness. Depending
on the angle from which you are
looking at the heating element,
this glow may be visible over the
marked edge of the heating ele-
ment. These are technical char-
acteristics. They have no effect
on quality and function.
The glass ceramic This is due to the nature of the
has uneven areas on material itself. Because of the
the surface. mirror-like finish on the cooking
surface, even extremely small
bubbles less than 1 mm in diame-
ter may be visible. These bubbles
will not have any adverse effect
on the operation of the cooktop
nor on the durability of the glass
ceramic cooking surface.
There is an uneven This depends on the countertop
gap between the that is present in the kitchen. For
cooktop unit and the this reason, a flexible seal is pro-
countertop. vided around the entire cooktop
unit.
Cause and troubleshooting
Demo mode is activated.
Disconnect the appliance from the power supply for 30 seconds by switching off
1.
the circuit breaker or fuse in the electrical panel.
Touch any touch field within the next 3 minutes.
2.
Operational fault
Switch the appliance off and on again.
1.
a If the fault was a one-off occurrence, the message disappears.
If the message appears again, call Customer Service. Please specify the exact
2.
error message when calling.
→ "Customer Service", Page 21
8 Disposal

Disposal

Find out here how to dispose of old appliances correctly.
Disposal
8.1 Disposal of your old appliance
Environmentally compatible disposal allows valuable raw
materials to be recycled.
Dispose of the appliance in an environmentally respon-
▶
sible manner.
Information about current disposal methods can be ob-
tained from your specialist dealer or local authority.
9 Customer Service

Customer Service

If you have any questions on use, are unable to eliminate
Customer Service
an issue in the appliance yourself, or the appliance needs
to be repaired, please contact our Customer Service.
With any warranty repair, we will make sure your appli-
ance is repaired by an authorized service provider using
genuine replacement parts. We use only genuine replace-
ment parts for all repairs.
Detailed information on the warranty period and terms of
warranty can be found in the Statement of Limited Product
Warranty, from your retailer, or on our website.
If you contact the Customer Service, you will need the
model number (E-Nr.) and the production number (FD) of
your appliance.
USA:
1-800-944-2904
www.bosch-home.com/us/owner-support/get-support
www.bosch-home.com/us/shop
CA:
1-800-944-2904
www.bosch-home.ca/en/service/get-support
www.bosch-home.ca/en/service/cleaners-and-accessories
9.1 Model number (E-Nr.) and production
number (FD)
You can find the model number (E-Nr.) and the production
number (FD) on the appliance's rating plate.
Making a note of your appliance's details and the Cus-
tomer Service telephone number will enable you to find
them again quickly.
Disposal en-us
21