Changing Batteries - LEGRAND Niky 1000 Manuel D'installation

6 features
software connection Niky 1000/1500
The UPS is equipped with a RS232 interface (DB9 cable for software communication is needed)
and USB interface, thanks to which it is possible by means of a computer to access a set of data
regarding the operation of the UPS and control the operating system unattended shutdown.
Software is available as on option for Win98/ME/2000, Novell and Linux, from the website
www.ups.legrand.com without charge. User license is included in the product.
Telephone protection
The NIKY UPS has an integrated, standard RJ11/RJ45 passing telephone connectionthat provides
protection for telephone or network equipment (modem, telephones, etc.) against overvoltage.

7 Changing batteries

Caution
Opening, repairing, or replacing parts inside the UPS must always be carried out by specialized
technical personnel only. First of all, switch off the UPS with the ON/OFF button located on the
front panel, then unplug the power cable from the 230V outlet socket.
1) Switch off the uninterruptible power supply.
2) Unplug the power cable from the mains socket.
3) Change the batteries with others of the same type and make, or having the same features
Keep clear from fire to avoid explosion while handling batteries.
Do not open or tamper with the battery case, because it contains toxic electrolyte that could be
harmful for your skin or eyes. Keep out of children's reach.
NOTiCe
The batteries must only be replaced by qualified technical personnel, who will dispose of
them in compliance with the law in force.
Niky 1000/1500
17