Technical Data - AEG MRC 4105 P Mode D'emploi

If there is a power cut or the mains plug has been removed from the power socket, the
settings will be retained if the power reserve batteries are inserted.
1. Open the battery compartment on the back.
2. Connect a 9 V, E compound battery to the supply connection. Please ensure the correct
polarity.
3. Close the battery compartment again.
4. If the device is not used for a prolonged period of time, please take the batteries out in
order to prevent leakage of battery acid.
CAUTION:
Batteries are not to be disposed of together with domestic wastes. Dispose of the used
batteries at the relevant collection bin or at your dealer's.
WARNING:
Do not expose the batteries to high temperatures or direct sunlight. Never throw batteries
into the fi re. There is a danger of explosion!
• Remove the plug before cleaning.
• Clean the appliance with a slightly humid cloth without any additives.
• Do not dip the appliance in water.
GB
Model: ....................................................................................................................MRC 4105 P
Power supply:........................................................................................................ 230 V, 50 Hz
Power consumption:.............................................................................................................3 W
Battery power reserve:................................................................................................ 9 V block
Protection class:.......................................................................................................................ΙΙ
Frequency ranges: .............................................................................UKW / FM 88 ~ 108 MHz
56
05-MRC 4105 P AEG 56
Inserting the batteries
(not supplied)
Cleaning

Technical Data

.............................................................................MW / AM 530 ~ 1600 kHz
28.03.2007, 8:04:23 Uhr