Cleaning And Maintenance; Electrical Connection; Disposal And Recycling; Storage - Scheppach bg 150 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20

9. Cleaning and maintenance

Always pull out the mains power plug before starting
any cleaning work.
Cleaning
• Keep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible. Wipe
the equipment with a clean cloth or blow it with com-
pressed air at low pressure.
• We recommend that you clean the device immedi-
ately each time you have finished using it.
• Clean the equipment regularly with a moist cloth
and some soft soap. Do not use cleaning agents or
solvents; these could attack the plastic parts of the
equipment. Ensure that no water can seep into the
device. The ingress of water into an electric tool in-
creases the risk of an electric shock.
Maintenance
There are no parts inside the equipment which require
additional maintenance.

10. Electrical connection

The installed electric motor is factory connected ready
for operation. The connection meets the applicable VDE
and DlN regulations.
The connection made by the customer as well as any ex-
tension cables used must comply with all relevant regu-
lations.
Connection and repair work on the elctric equipment
must be carried out by a qualified technician only.

11. Disposal and recycling

The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The equip-
ment and its accessories are made of various types of
material, such as metal and plastic. Never place de-
fective equipment in your household refuse The equip-
ment should be taken to a suitable collection center for
proper disposal. If you do not know the whereabouts
of such a collection point, you should ask in your local
council offices.

12. Storage

Store the equipment and accessories out of children's
reach in a dark and dry place at above freezing tem-
perature. The ideal storage temperature is between 5
and 30 °C. Store the electric tool in its original packag-
ing.
GB
19

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bg 20049031049014903105901

Table des Matières