Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
• Please note that our equipment has not been de-
signed
• for use in commercial, trade or industrial applica-
tions. Our warranty will be voided if the equipment is
used in commercial, trade or industrial businesses
or for equivalent purposes.
Residual risks
The machine is allowed to be used only for its intend-
ed purpose! Even when the equipment is used as pre-
scribed it is still impossible to eliminate certain residual
risk factors. The following hazards may arise in con-
nection with the machine's construction and layout:
• Contact with the grinding wheel where it is notcov-
ered.
• Catapulting of parts from out of damaged grinding
wheels.
• Catapulting of workpieces and parts of workpieces.
• Damage to hearing if essential ear-muffs are not
used.
• Lung damage if no suitable protective dust mask is
used.
• Health damage caused by hand-arm vibrations if the
equipment is used over a prolonged period or is not
properly guided and maintained.
• The use of incorrect or damaged mains cables can
lead to electrical injuries.
• Although having regarded all considerable rules
there may still remain not obvious remaining hazrds.
• Minimize remaining hazards by following the instruc-
tions in "Safety Rules", "Use only as authorized" and
in the entire operating manual.

5. Safety instructions

CAUTION! In order to protect yourself from the danger
of electric shock, injury or fire when using electrical
power tools, please observe the following basic safety
precautions. Read all these requirements before you
use the electrical power tool, and keep the safety ad-
vice in a safe place.
Working safely
1. Keep your working area clean and tidy.
• A disorderly working area can lead to accidents.
2. Be aware of the effects of the environment.
• Do not leave electrical power tools out in the rain.
• Do not use electrical power tools in moist or wet sur-
roundings.
• Ensure that your working area is well lit.
• Do not use electrical power tools in areas where
there is risk of fire or explosion.
3. Protect yourself from electric shock.
• Avoid touching earthed objects such as pipes, heat-
ing radiators, ovens or refrigerators with parts of
your body.
4. Keep other people at a safe distance.
• Do not allow other people, in particular children, to
touch the electrical power tool or the mains lead.
Keep them away from your working area.
5. Store currently unused electrical power tools in
a safe place.
• When not being used electrical power tools should
be stored in dry conditions in a high or enclosed
place, out of reach of children.
6. Do not overload your electrical power tool.
• By keeping within the specified working range of the
tool you will work more safely and achieve a better
result.
7. Use the right electrical power tool for the task.
• Do not use low-output devices for heavy tasks.
• Do not use an electrical power tool for purposes
for which it was not intended. For example, do not
use a hand operated circular saw for trimming tree
branches or cutting logs.
8. Wear suitable clothing.
• Do not wear loose-fitting clothing or jewellery. They
could become caught on moving parts.
• We recommend that you wear anti-slip footwear
when working outdoors.
• If you have long hair, wear a hair net.
9. Use personal protective equipment.
• Wear protective glasses.
• Wear a dust mask if your work generates dust.
10. Attaching the vacuum dust extraction device.
• Where there are connection points provided for vac-
uum dust extraction please ensure that the connec-
tions are made and used properly.
11. Do not use the mains lead for purposes for
which it was not intended.
• Do not use the mains lead to pull the plug out of the
mains socket. Protect the mains lead from heat, oil
and sharp edges.
12. Securely support the workpiece.
• Use clamps or a vice to grip the workpiece firmly.
This is much safer than holding it with your hand.
13. Avoid placing your body in an unnatural position.
• Keep proper footing and balance at all times.
14. Look after your tools carefully.
• Keep cutting tools sharp and clean. This way you
will work more safely and achieve better results.
• Follow the advice on tool lubrication and co suma-
bles replacement.
• Check the condition of the mains lead on your elec-
trical power tool regularly and have any damage re-
paired by a competent specialist.
• Check the condition of extension leads regularly and
replace them if they are damaged.
• Keep handles and hand grips clean, dry and free of
oil and grease.
15. Pull the mains plug out of the mains socket.
• Do this if the electrical power tool is not being used,
before carrying out maintenance tasks on the electri-
cal power tool and whenever you are changing in-
serted tools, e.g. saw blades, drills or router bits.
16. Make sure that no spanners, keys etc. are left
attached.
• Check before switching on that all spanners, keys
and setting tools have been removed.
GB
15

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bg 20049031049014903105901

Table des Matières