Declaration Of Performance - attika Q-Tee II GAS Manuel De L'utilisateur

English
1. Unique identification code
of the product-type
2. Type
3. Intended use
4. NPD Manufacturer
5. Authorised representative
6. System of assessment
AVCP
7. Notified body
8. Declared performance
Essential characteristics
Fire safety
Reaction to fire
Distance to combustible
materials
Minimum distances [mm]
For other installation settings
see instruction manual
Risk of burning fuel falling out
CO-emission of combustion
products
NOx emission
Surface temperature
Electrical safety
Cleanability
Maximum operating pressure
Flue gas temperature T at
nominal heat output
Mechanical resistance
(to carry a chimney/flue)
Thermal output
Nominal heat output
Room heating output
Water heating output
η
Energy efficiency
9. The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point 8.
This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4.
Signed for and on behalf of the manufacturer by:
Place
Date
attika
RAIS/

DECLARATION OF PERFORMANCE

Regulation (EU) 2009/142/EC
Q-Tee II Gas, Q-Tee II C Gas
Balanced Flue Gas Stoves
Domestic room heater
RAIS A/S
Industrivej 20, Vangen
DK-9900 Frederikshavn,
Denmark
n/a
System 3
The notified laboratory
performed the determination of the product type on the basis of type testing under system 3 and
issued test report
a.
Harmonized technical specification:
A1
Rear
Sides
Ceiling
Front
Floor
N/D
31 ppm
(G20@20 full All)
23 ppm
(G20@20 full All)
Pass
Pass
Pass
- bar
291°C
(G20@20 full All)
NPD
9 kW (G20@20 full All)
9 kW (G20@20 full All)
- kW
78,3 % (G20@20 full All)
FREDERIKSHAVN, DENMARK
- -
- User manual for Q-Tee II Gas / Q-Tee II C Gas
No.: 12
Telephone
Telefax
Webmail
Homepage
Intertek House, Cleeve Road
Leatherhead, Surrey
KT22 7SB, United Kingdom
Performance
Q-Tee II Gas
Q-Tee II C Gas
75
400
450
850
270
Henrik Nørgaard, Managing Director
+45 98 47 90 33
+45 98 47 92 91
kundeservice@rais.dk
www.rais.com
BSEM 613: 2001+A1:2008
Signature
75