attika Q-Tee II GAS Manuel De L'utilisateur page 172

English
The air intake to the main burner is adjust-
ed for LPG configuration by loosening the
two nuts and pushing the plate all the way
towards the burner. (The hole fully open)
The two air intakes for the secondary burn-
er are adjusted for LPG configuration by
loosening the two screws and rotating the
air intake by 90°. So that both holes in the
vertical pipe are now open. (the small one
at the rear and the large one at the front)
20
attika
RAIS/ - User manual for Q-Tee II Gas / Q-Tee II C Gas
Small hole at the rear
Large hole at the front