Customising The Tv Channels - Sony MFM-HT205 Mode D'emploi

Customising the TV channels

You can customise the TV channels using the "Manual Program
Preset" menu.
1 Press the MENU button.
2 Press the M/m buttons to select
press the OK button.
The "Set Up" menu appears on the screen.
3 Press the M/m buttons to select "Manual Program
Preset" and press the OK button.
The "Manual Program Preset" menu appears on the screen.
4 Press the M/m buttons to select the desired item
and press the OK button.
Adjust the selected item according to the following
instructions.
x Presetting the channels
You can preset the channels, one by one, in the program order of
your choice.
1 Press the M/m buttons to select "Program" and
press the OK button.
2 Press the M/m buttons to select a program number
for which you want to preset the channel and press
the OK button.
3 Press the M/m buttons to select "System" and
press the OK button.
4 Press the M/m buttons to select the TV broadcast
system and press the OK button.
• B/G: Western European countries/regions
• D/K:
Eastern European countries/regions
• I: The United Kingdom
• L: France
5 Press the M/m buttons to select "Channel" and
press the OK button.
6 Press the M/m buttons to select the type of channel
to be tuned and press the OK button.
• S:
Cable channels
• C: Terrestrial channels
7 Press the 0–9 buttons to enter the channel number
of the TV broadcast directly and press the OK
button.
"Confirm" is selected automatically.
Tip
If you do not know the channel number of the TV broadcast, press the
M/m to search for it.
8 Press the OK button.
The "Confirm" menu appears on the screen.
9 Press the M/m buttons to select "OK" and press the
OK button.
The adjustment you have made for this channel is stored.
10 Repeat steps 1 to 9, if you want to preset another
channel.
11 Press the MENU button to exit the menu screen.
(Set Up) and
x Tuning the channels precisely
Normally the automatic fine tune (AFT) option will give the best
possible picture, however you can manually fine-tune the TV to
obtain a better picture if the picture is distorted.
1 Press the M/m buttons to select "AFT" and press
the OK button.
2 Press the M/m buttons to tune the channel precisely
between –15 and +15 and press the OK button.
"Confirm" is selected automatically.
3 Press the OK button.
The "Confirm" menu appears on the screen.
4 Press the M/m buttons to select "OK" and press the
OK button.
The adjustment you have made for this channel is stored.
5 Repeat steps 1 to 4 if you want to tune another
channel.
6 Press the MENU button to exit the menu screen.
To restore automatic fine tuning
Select "On" in step 2 above.
x Skipping unnecessary channels
You can skip unnecessary channels when selecting channels
using the PROG +/– buttons.
1 Press the M/m buttons to select "Program" and
press the OK button.
2 Press the M/m buttons to select a program number
which you want to skip and press the OK button.
3 Press the M/m buttons to select "Skip" and press
the OK button.
The "Skip" menu appears on the screen.
4 Press the M/m buttons to select "Yes" and press the
OK button.
"Confirm" is selected automatically.
5 Press the OK button.
The "Confirm" menu appears on the screen.
16