Charging The Battery; Inserting The Sd Memory Card - VOLTCRAFT BS-1000T Mode D'emploi

The rechargeable battery is located on the back of the endoscope basic device. Do not replace the re-
chargeable battery with another rechargeable battery or any normal battery. Remove the battery if the
endoscope will not be used for any extended period. Make sure that the polarity is correct when replacing
the battery.
b) Charging the battery
1. Connect the plug of the mains unit with the DC input socket.
2. Connect the mains adapter to a mains outlet.
3. The battery is now charged. The endoscope basic device is ready for operation even during the battery charging
process.
Only connect the mains adapter to the mains socket after performing all other connections.
Please observe that the ambience temperature is not less than 0 °C or more than 40 °C while charging.
c) Inserting the SD memory card
The BS-1000T can store recordings (images, videos) on an SD card. The memory card included in the delivery has a
memory capacity of 4 GB. The endoscope basic device is also compatible with SD cards with a memory of up to 8 GB.
To use the photo or video function, you need to insert an SD memory card first.
1. Open the device's SD card slot lid.
2. Press on the SD card until it is completely inserted.
3. Only one input alignment is correct.
26
Battery:Rechargeable
Li-Polymer Battery
(3.7V/2500mAh)
WEEE-Reg.-Nr.:
Model No.BS-1000
DE28001718
MADE IN TAIWAN