Camera Lighting; Operation; Setting The Language; Setting The Date/Time - VOLTCRAFT BS-1000T Mode D'emploi

f) Camera lighting
To use the endoscope in absolutely dark areas as well, the BS-
1000T has an integrated rotary control for smooth dimming of
the LED lighting contained in the camera head.
Turn the controller at the left side of the basic device to in-
crease or reduce brightness.
Set lighting so that the screen image is not too bright or too
dark.

8. Operation

a) Setting the language
1. Press the "OK" button once to call the menu.
2. Use the / buttons to move the cursor upwards or downwards and then choose "Sprache" / "LANGUAGE"
/ "Langue" / "Taal" and press "OK".
3. Use the / buttons to move the cursor upwards or downwards and to choose the desired language.
4. Press "OK" to save the change and return to preview mode.
b) Setting the date/time
Set the date and time before recording images or videos. The index will be sorted by recording date and time.
1. Press the "OK" button once to call the menu.
2. Use the / buttons to move the cursor upwards or downwards and then choose "Date/Time setup" and
press "OK".
3. Enter the correct date and time. Use the
/ buttons to change the value.
4. Switch the date and time display on the screen on or off by setting the "DISPLAY" parameter to "ON" or "OFF".
Time and date indications are always noted on the photos or videos recorded. This parameter only refers
to preview on the monitor.
c) Automatic power-off
With the "Auto Off" Menu function, you can set the time after which the device automatically powers off if no recording
is running or a button is pressed.
1. Press the "OK" button once to call the menu.
2. Use the / buttons to move the cursor upwards or downwards and then choose "Auto Off" and press "OK".
3. Use the / buttons to move the cursor upwards or downwards and choose the desired automatic power-off
time. The endoscope will switch off automatically after the corresponding time if it is not in use then.
4. Press "OK" to save the change and return to preview mode.
28
/ buttons to move the cursor upwards or downwards and use the
-
+