UFESA AC5010 Mode D'emploi page 12

Replacing the motor protection
filter (14)
It is advisable to replace the motor protection
filters after changing the paper dust bags five
times.
With no bag in the vacuum cleaner, take the
filter together with the retainer (15) out and put a
new one in. (Fig. 17)
Never use the vacuum cleaner without this filter
fitted.
Cleaning and replacing the HEPA
filter (13)
The HEPA filter (13) should be cleaned
regularly by knocking out the dirt and rinsing.
- Open the cover, take out the filter. (Fig. 18)
- Tap it or wash it with water and mild detergent.
Then leave it to completely dry.
- It is advisable to clean the HEPA filter at least
after six uses. After being washed for ten times
it should be replaced.
Ionization Feature
This vacuum cleaner contains an built-in
negative ions generator. Ions are naturally
occurring electrically charged particles. The
ionizing feature can make the outlet air clean
and fresh. (Fig. 19)
ACCESSORY
Upholstery nozzle (18)
This accessory has been designed to clean all
types of upholstery.
Crevice nozzle (19)
Use this accessory to vacuum crevices and
deep grooves and nooks, etc.
Hard floor tool (20)
This tool has been specially designed to clean
hard floor surfaces, tiles and terracotta, the soft
hair bristles brush over the surface picking up
the dust but without damaging the floor.
Furniture nozzle (21)
This accessory is ideal for vacuum cleaning
furniture and other delicate surface, prevent
surfaces from being damaged.
TURBO BRUSH FOR RUGS &
CARPETS (22) (Only for AC5015)
This brush is specially designed for cleaning
rugs and carpets. The rotating brush beats
gently against the carpet fibers for deeper
cleaning.
XXL hard floor brush (23) (Only for
AC5010XXL)
The XXL hard floor brush has a 33 % larger
cleaning surface than common models, to
enable an especially thorough cleaning of hard
floors, tiles and terracotta.
The soft hair bristles pick up the dust without
damaging the floor surface.
ADVICE ON DISPOSAL:
Our goods come in optimized packaging.
This basically consists
non-contaminating materials which should be
handed over to the local waste disposal service
as secondary raw materials.
This product complies
Directive 2002/96/CE. The crossed
wheelie bin symbol shown on the
appliance indicates that when it comes
to dispose of the product it must not be included
in with household refuse. It must be taken to a
special refuse collection point for electric and
electronic appliances or returned to the
distributor when purchasing a similar appliance.
Under current refuse disposal regulations, users
who fail to take discarded appliances to special
refuse collection points may be penalized.
Correct disposal of discarded appliances means
that they can be recycled and processed
ecologically, helping the environment and
allowing materials used in the product to be
reused. For more information on available
waste disposal schemes contact your local
refuse service or the shop where the product
was purchased. Manufacturers and importers
are responsible for ecological
processing and disposal of products, whether
directly or via a public system. Your local town
council can provide you with information about
how to dispose of obsolete appliance.
in using
with EU
recycling,