Fagor PLC-804 Mode D'emploi page 13

7. EMPTYING OUT THE WATER
1. Turn the switch off.
2. Unplug the mains cable from the power
point.
3. Wait until the appliance has cooled
down completely.
4. Remove the plug from the boiler (10).
5. Empty the boiler by holding it upside
down. (Fig. 4)
6. Replace the boiler's plug.
8. MAINTENANCE AND CLEANING
• Unplug the appliance and wait until it
cools down before proceeding to clean
it.
• Clean the outside of the boiler with a
soft, slightly-dampened cloth.
• The surface of the shoe must always
be clean. Cotton deposits and other
impurities can attack the iron's shoe. To
clean, simply rub the cold surface with
a soft, slightly-dampened cloth. Do not
use descaling agents.
• Do not use detergents or abrasive
products to clean the appliance.
• With a view to preventing the shoe from
getting scratched, you should avoid
ironing zips, metal buttons, etc, and,
similarly, you should not place the iron
on metal or rough surfaces.
• After each use, empty the tank and
let the iron cool down before putting it
away.
• Do not submerge the appliance in water
or place it under a tap to fill the water
tank.
9. INFORMATION FOR THE CORRECT
DISPOSAL OF ELECTRICAL AND
ELECTRONIC APPLIANCES
At the end of its working
life, the product must not
be disposed of as urban
waste. It must be taken to
a special local authority
differentiated waste
collection centre or to a
dealer providing this service. Disposing of
a household appliance separately avoids
possible negative consequences for the
environment and health deriving from
inappropriate disposal and enables the
constituent materials to be recovered to
obtain significant savings in energy and
resources.
To remind you that you must collaborate
with a selective collection scheme, the
symbol shown appears on the product
warning you not to dispose of it in
traditional refuse containers.
For further information, contact your local
authority or the shop where you bought the
product.
12