Festool CLEANTEX CTM 26 E Notice D'utilisation D'origine page 18

CTM
GB
EKAT
Use only original Festool spare parts!
4
Order No. at:
5
www.festool.com/Service
3
2
1
Damaged safety devices and compo-
nents must be repaired or replaced in a
recognised specialist workshop, unless otherwise in-
dicated in the operating manual.
Observe the following instructions:
– The manufacturer or an instructed person must
perform a dust test at least once a year to deter-
mine whether the filter is damaged, the machine is
sealed properly and the monitoring features are
functioning correctly.
– Anything that cannot be cleaned must be discarded
in impermeable bags. Observe applicable disposal
regulations!
– For user servicing, the machine must be disman-
tled, cleaned and serviced, as far as is reasonably
practicable, without causing risk to the mainte-
nance staff and others. Suitable precautions in-
clude, decontamination
provision from local filtered exhaust ventilation
where the machine is dismantled, cleaning of the
maintenance area and suitable personal protec-
tion.
9.1 Changing the filter element
NOTE
Motor damage

Never operate the extractor without a filter ele-
ment fitted as the motor may become damaged.

Open the locking clips [2-2] and remove the top
section of the machine [2-1].

Turn the top section of the machine so that the
main filter is facing upwards (Fig.[9]).

Fold over the lever [9-3] and remove the retainer.
[9-2]

Remove the used main filter and replace [9-1]
with a new one.

Dispose of the used filter in accordance with stat-
utory regulations.

Insert the retainer [9-2] and fold over the lever
[9-3] until it engages.

Replace the top section [2-1] and close the lock-
ing clips [2-2].
9.2 Emptying the dust container
The dust container [2-3] can be emptied once the top
section has been removed.
18
before dismantling,

After extracting fluids, clean the fill level sensors
[10-1] regularly with a soft cloth and inspect for
damage.
10 Accessories
The order numbers for the accessories and filters
can be found in the Festool catalogue or on the Inter-
net at "www.festool.com".
10.1 Modules
The following modules for upgrading the mobile dust
extractor are available in the accessories pro-
gramme. Modules must be fitted to the module slot
[1-3] by an authorised service workshop:
– Compressed air module,
– Socket module with permanent power supply,
– Socket module with automatic switch-on unit (not
suitable for GB 110 V version),
– Energy box module (EAA) for using the automatic
switch-on unit on the EAA.
You can find more detailed information on the mod-
ules at "www.festool.com".
11 Environment
Do not dispose of the device in house-
hold waste! Recycle devices, accesso-
ries and packaging. Observe applicable
country-specific regulations.
EU only: European Directive 2002/96/EC
stipulates that used electric power tools must be col-
lected separately and disposed of at an environmen-
tally responsible recycling centre.
Information on REACh:www.festool.com/reach
12 EU Declaration of Conformity
Mobile dust extractor
CTM 26 E
CTM 26 E AC
CTM 36 E
CTM 36 E AC, CTM 36 E
AC-LHS
CTM 36 E LE
CTM 36 E LE AC
CTM 48 E
CTM 48 E LE
CTM 48 E AC
Serial no.
495865, 495866, 495870,
496948
496313, 496544, 496545,
496550, 497990, 497991,
497992
495867, 495868, 495871,
496949
496546, 496547, 496548,
496551, 497069, 497073,
497072, 497076, 497070
495869, 496947, 496950
496549
498006, 498007
498008
498021, 498022