Aux - JVC KD-R671 Manuel D'instructions

RADIO
LOCAL SEEK ON: Searches only FM stations with good reception. ; OFF: Cancels.
• Settings made are applicable only to the selected source/station. Once
you change the source/station, you need to make the settings again.
IF BAND AUTO: Increases the tuner selectivity to reduce interference noises from
adjacent FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to
interference noises from adjacent FM stations, but sound quality will not be
degraded and the stereo effect will remain.
MONO ON: Improves the FM reception, but the stereo effect will be lost. ;
OFF: Cancels.
2
NEWS-STBY* ON: The unit will temporarily switch to News Programme if available. ;
OFF: Cancels.
2
REGIONAL* ON: Switches to another station only in the specific region using the "AF"
control. ; OFF: Cancels.
2
AF SET* ON: Automatically searches for another station broadcasting the same
program in the same Radio Data System network with better reception
when the current reception is poor. ; OFF: Cancels.
2
TI SET* ON: Allows the unit to temporarily switch to Traffic Information if available
("TI" lights up). ; OFF: Cancels.
2
PTY SEARCH* Select a PTY code (see below).
If there is a station broadcasting a program of the same PTY code as you
have selected, that station is tuned in.
PTY code: NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE,
VARIED, POP M (music), ROCK M (music), EASY M (music), LIGHT M (music),
CLASSICS, OTHER M (music), WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION,
PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M
(music), DOCUMENT
*
2
Only for FM source.
8

AUX

Default: XX
Use a portable audio player
1
Connect a portable audio player (commercially available).
3.5 mm stereo mini plug with "L" shaped connector
(commercially available)
Auxiliary input jack
2
Select [ON] for [AUX] in [SRC SELECT]. ( 4)
3
Press
4
Turn on the portable audio player and start playback.
Use a 3-core plug head stereo mini plug for optimum audio
output.
Use a Bluetooth® device
1
Connect the Bluetooth adapter, KS-BTA100 (separately purchased).
Auxiliary input jack
2 Register (pair) the Bluetooth device with KS-BTA100.
3 Select [BT ADAPTER] for [AUX] in [SRC SELECT]. ( 4)
4 Press
5 Start using the Bluetooth device.
For details, refer to the instruction manual of KS-BTA100.
Portable audio player
repeatedly to select AUX.
Wiring harness of the unit
( 17)
Blue/white
Blue/white: Remote
Black
Black: Ground
Brown
Brown: Tel muting
repeatedly to select BT AUDIO.