General Information; Tools & Supplies Required For Installation - Dometic 935000.140 Instructions D'installation Et D'utilisation

SPECIFICATIONS
VERANDA ROOM MODEL
935000.140 Side & Door Asm.- Std.
935000.150 Side & Door Asm. - Tall
935002.120 2' Front Panel - Std.
935002.130 2' Front Panel - Tall
935004.120 4' Front Panel - Std.
935004.130 4' Front Panel - Tall
935008.120 8' Front Panel - Std.
935008.130 8' Front Panel - Tall

GENERAL INFORMATION

The Veranda Room is designed to fit on most Dometic
awnings and many other RV awnings with a 3-1/2" roller
tube. The rafter poles enable the Veranda Room to be the
full length of the awning or (with the use of shorter front
panels) the Veranda Room can be used on a portion of
the awning. Separate front panels in shorter lengths are
available from your dealer. The Veranda Room includes
integrated privacy panels.
 The Veranda Room front is designed so
there will be approximately 3 or more inches of awning
fabric overhanging the Veranda Room on each side. This
is provided to keep rain water from running off the edge of
the awning to the inside of the Veranda Room.
Table 1
IDENTIFICATION
LETTER
AS
AT
BS
BT
CS
CT
DS
DT
AWNING
SIZE
8'
9'
10'
11'
12'
13'
14'
15'
16'
17'
18' AS, BS, CS, DS
19' AS, BS, CS, DS
20'
21'
22' AS, BS, DS, DS
23' AS, BS, DS, DS
24' AS, CS, DS, DS
25' AS, CS, DS, DS
A. Tools &
Installation:
● Tape Measure
● Electric Drill
● Step Ladder
● Marking Pen
● 1/8" Drill Bit
● Caulking Gun
● Silicone Sealant
● Round File
● Straight Edge
● Hammer (optional for tent stakes)
● String & Plumb Bob
● Phillips Screwdriver
● Scissors or Utility Knife
4
Table 2
SUGGESTED PANEL QTY
Standard
AS, CS AT, CT
AS, CS AT, CT
AS, BS, CS AT, BT, CT
AS, BS, CS AT, BT, CT
AS, DS AT, DT
AS, DS AT, DT
AS, BS, DS AT, BT, DT
AS, BS, DS AT, BT, DT
AS, CS, DS AT, CT, DT
AS, CS, DS AT, CT, DT
AT, BT, CT, DT
AT, BT, CT, DT
AS, DS, DS AT, DT, DT
AS, DS, DS AT, DT, DT
AT, BT, DT, DT
AT, BT, DT, DT
AT, CT, DT, DT
AT, CT, DT, DT
Supplies Required
Tall
for