Specifications And Declaration Of Conformity - Active M.T.P. 125 Manuel D'instruction

Assembly extension - hedgetrimmer machine fig.6:
- slip the coupling (7) on the machine transmission tube (8)
- in order to ease the introduction of the coupling (9) on the
inner shaft (10) twisting slightly one way and the other the
extension till it slipped into the tube for ( 40mm.)
- rotate the hedgetrimmer in to the position you want.
- screw the lever (11), clockwise, till the extesion/hedgetrimmer
is secured.
5. SPECIFICATIONS A ND DECLARATION OF CONFORMITY
MODEL
DISPLACEMENT cm³
POWER Kw / CV
CARBURETOR
IGNITION
FUEL TANK CAPACITY
CLUTCH
ANTIVIBRATION - SYSTEM
REDUCTION GEAR
REDUCTION GEAR LUBRIFICATION
BLADES ROTATING ANGLE
CUTTING SYSTEM
BLADES LENGHT
THROTTLE CONTROL
TRANSMISSION TUBE Ø
WEIGHT Kg.
TO SERIAL NUMBER
FROM SERIAL NUMBER
DIRECTIVES
SOUND PRESSURE
(EN ISO 22868)
Technical documentation available by the Technical Department.
ACTIVE s.r.l. Zona Artigianale - 26037 S. Giovanni in Croce (CR)
declare under its own responsability that the machine :
is complies with the requirements established by directive:
SOUND POWER
LEVEL LEVEL
(EN ISO 22868)
96 dB (A) 107 dB (A)
- In order to put the lever(11) in the position you want, push the
botton (12) and rotate it.
WARNING: the maximum extension allowed is
1.500mm., otherwise is dangerous. Only one
extension each time can be used on the machine, the
750mm. or alternatively the 1.500mm..
HEDGETRIMMER M.T.P. 125
1.03 / 1.4
DIAPHRAGM TYPE WALBRO WYC PRIMER DEVICE
54 mm. (Heavy duty type)
YES (Inside of the clutch housing)
TWO REDUCTION
GREASE
BOTH SIDES
480 MM (Ultralight)
Lockout safety device with automatic release (ROTATING TYPE)
Euro 1
25XX9999
2006/42/CE - 2004/108/CE - 2000/14/CE - 2002/44/CE
VIBRATION LEVEL (m/s²)
(UNI EN ISO 22867)
DX
4
26037 San Giovanni in Croce (CR) - ITALY
21
ENGLISH
24,5
DIGITAL
0.5 Lt.
90°
26mm.
6.2
Euro 2
E25XX0001
(Annex V)
2012/46/CE
(Annex VI)
SX
5
ALBERTO GRIFFINI
PRESIDENTE
ACTIVE S.r.l.
Via Delmoncello, 12
01/03/2014
GB