Télécharger Imprimer la page

Publicité

Liens rapides

SUZUKI GSX-R/S 125 '17
WARNING!
Do not fully tighten the
screws until it is ensured
that the KIT is correctly
attached and aligned.
ATTENTION: For a full equip assembly, mount the 3p system after the top master.
IMPORTANT: Based on European models. For compatibility with models in other continents, check www.shad.es
No apretar los tornillos del
todo hasta asegurarse que
el KIT está correctamente
colocado y alineado.
S0GS17IF
Ziehen Sie die Schrauben nicht
ganz fest, bevor Sie sich nicht
vergewissert haben, daß der
Bausatz korrekt eingestellt und
ausgerichtet ist.
DESIGNED IN
BARCELONA
Non stringere del tutto le
Ne pas serrer les vis
viti fin tanto non si è
avant d'être sûr que le
sicuri che il kit è
KIT est correctement
collocato correttamente
monté et ajusté.
e allineato.

Publicité

loading

Sommaire des Matières pour Shad S0GS17IF

  • Page 1 ATTENTION: For a full equip assembly, mount the 3p system after the top master. IMPORTANT: Based on European models. For compatibility with models in other continents, check www.shad.es...