Using The Setevent Menu - Honeywell 301EM Mode D'emploi

Programming and Calibration

Using the SetEvent Menu

Using the SetEvent Menu
Although the 301EM is fully configured with specific event configurations
(see the tables in Appendix A for details on available configurations), it is
nonetheless possible to modify events to suit different applications.
• Scroll to the SetEvent menu and press enter to select.
If this is the initial setup and no previous events have been configured,
you must select the event configuration (Type) from the menu (see the
tables in Appendix A for details).
• Use the arrows to scroll through the options and press enter to select.
The available options (described in greater detail in Appendix A) are:
Type1 CND, Type2 CND, Type3 US, Type # 4 and OTHER.
Note: Selecting the "OTHER" event type creates an event with all fields
and events blank. Therefore, no events will appear when pressing
the arrows. Events must be created before they appear in the scroll
list.
36
Once the configuration type has been selected, it can no
longer be changed without erasing ALL events and
reconfiguring the system anew. Consult the tables in
Appendix A to make certain that the appropriate event
configuration is selected.
301EM User Manual
Menu
SetEvent
SetEvent
Type1CND