Accessing The Programming Menus - Honeywell 301EM Mode D'emploi

Programming and Calibration

Accessing the Programming Menus

Accessing the Programming Menus
Acces to the 301EM's programming is password protected for security
reasons. The password is "VA".
• Press the enter key to access the programming menus. The
PASSWORD screen is displayed
• The first letter is underlined. Press the up or down arrow to change
the letter until V is displayed
• Press Enter to confirm. The next letter is underlined. Press the up or
down arrow until A is displayed
• Press Enter to confirm the password and access the menus
30
PASSWORD
AA
301EM User Manual