Installation Instructions
Installation Guidelines
Installation Guidelines
These guidelines must be strictly observed to ensure that the equipment
will work properly. If they are not applied, Honeywell will not recognize any
liability in case of improper operation:
Make sure to locate all units easily accessible for proper service.
•
Avoid any location where units could be subject to vibrations.
•
Avoid any location close to any electromagnetic interference.
•
Avoid any location where there are large temperature swings.
•
Verify local requirements and existing regulations which may affect
the choice of location.
Wall Mount Installation
We recommend installing the
monitor at a height of 1.5 m
(4.9 ft) from the ground (eye
level).
• Mark two holes 162mm (6
3/8") apart in height
• Mark two holes268.3mm
(10 9/16") apart in width
• Drill 6.35mm (1/4") holes
and prepare as necessary
• Mount unit with appropriate screws
Remember to pass all wiring through knock-outs at base of unit, using the
appropriate conduit.
10
Installation Instructions
301EM User Manual