Playback Of A Video Cd (Cds) Without P. B. C. (Version 1.1) - Sharp CD-M10000V Mode D'emploi

Playback of a video CD (CDs) without P. B. C. (Version 1.1)

CD-M10000V
ENGLISH
1
Turn on the TV and set the input selector to "VCR".
2
Press the ON/STAND-BY button to turn the power on.
3
Press the CD/VIDEO CD (CD) button.
E-17
General control (See page 12.)
4
Press the OPEN/CLOSE button to open the disc tray.
5
Place the video CD(s) on the disc tray, label side up.
When loading a third disc, press the DISC SKIP button to turn the
disc tray, then place the video CD in the open position.
z Video CDs can be placed in any open position in the disc tray.
z Be sure to place 8 cm (3") Video CD(s) in the middle of the disc positions.
6
Press the OPEN/CLOSE button to close the disc tray.
Total number of tracks on the
video CD whose number is flashing
7
To select the video CD you want to listen to first, press the DISC
SKIP button.
8
Press the ( ) button to start playback.
z Playback will begin from track 1 on the disc you have selected to play. After
that disc finishes playing, the next disc will automatically start playback.
z When the last track on the third disc has finished playing, the unit will stop au-
tomatically.
z When there is no video CD in one of the disc 1 - 3 positions, the next video
CD will be played.
Notes:
z During playback, you can select another disc by pressing either of the DISC SKIP
button or one of the 1 - 3 buttons.
z Whilst the disc is being read ("TOC READ" is displayed), another disc cannot be
selected even if you press the DISC SKIP button or one of the
01/10/30 CD-M10000V(X)E2.fm
Total playing time of the video CD
whose number is flashing
1 - 3 buttons.