Sony VPL-HW55ES Guide De Référence Rapide page 15

Connecting to a 3D Sync Transmitter
Right side of the projector
Connecting cable
: 3D sync signal flow
CAUTION
Be sure to use straight-type LAN cable of up to 15 m labeled TYPE CM, and do not use an
extension cord.
Note
You can use a 3D Sync Transmitter separate from this unit, using an optional LAN cable (straight-
type).
If the usage environment has interference of a continuous specific frequency, synchronization of 3D
image signals and the 3D glasses may be lost. In this case, use a LAN cable labeled Category 7.
When watching 3D images in an environment that has even more interference, use the internal
transmitter.
For more information, refer to "Connections and
Preparations" in the Operating Instructions contained in
the supplied CD-ROM.
3D Sync Transmitter
(not supplied)
15
US