Avdel eRiv b10 Notice Originale page 13

GB
Quick-replacement of the rechargeable battery
Nominal voltage: 14.4 V
•
Capacity:
•
Li-Ion 1.5 Ah (4 cells)
o
***Li-Ion 3.0 Ah (8 cells)
o
Weight:
•
1.5 Ah: 0.33 kg
o
3.0 Ah: 0.55 kg
o
Charging device
Input voltage: 100-240 V / 50-60 Hz
•
Output voltage: 14,4 V
•
Output current: max. 1.5 A
•
Recharging time:
•
1.5 Ah: <60 minutes
o
3.0 Ah: <120 minutes
o
Weight: 0.41 kg
•
A
B
F E
G
Charging the battery
Note: The battery is partially charged on delivery.
To guarantee full power of the battery, charge it completely in the charger before first use. Pay attention to the charge indicator on the charging device. The Li-Ion
battery can be recharged at any time without affecting its fatigue life. Interrupting the charging process doesn't damage the battery.
Note: The optimum operating temperature range lies between 0°C (32 °F) and 45°C (113°F).
Please consider the notices for disposal.
Removing the battery
The battery (G) is equipped with a locking mechanism (H). As long as the battery remains inside the electric riveting machine it is held in position by a spring. To
remove the battery (G), press the unlocking button (H) and pull the battery from the electric riveting device.
Don't use force.
Putting the device into operation
Insert the battery. Only use original eRiv
The use of other batteries may lead to injuries and risk of fire.
Push the battery (G) from under into the stand of the electric riveting machine, holding the locking button (H) pressed. Push the battery into the stand completely
until it is securely locked.
Avdel UK Limited
Operational description
C
H
TM Li-Ion batteries with the voltage depicted on the type label of your electric riveting machine.
Pacific House
2 Swiftfields
Watchmead Industrial Estate
Welwyn Garden City
Hertfordshire AL7 1LY
Data on noise and vibrations
Noise emission: L
•
Uncertainty: K = 3 dB
•
The noise level during operation can
•
exceed 80 dB(A)
Use ear protectors!
•
Vibrations: <2.5 m/s2
•
Total weight (including 1x 1.5 Ah battery,
charging device and packaging): 4.5 kg
Configurations with power plugs for worldwide
use are available (CE/ECM/UL/ETL/CB/SAA)
Depicted components
The numbering of the components in the picture refers to the
picture of the electric riveting machine
A) Nosepiece
B) Front sleeve
C) Failure indication
D) Mandrel collector
E) Trigger
F) Riveting area illumination
G) Battery
H) Battery locking switch
*** The components depicted or described are not part of the
default scope of delivery. You can find all accessories in our
accessory program.
Tel.: +44 (0) 1707 292000
Fax.: +44 (0) 1707 292199
Mail.: enquiries@infastech.com
www.avdel-global.com
www.infastech.com
= 78,8 dB
PA
12
13