Approvals/Standards; Overview; Europe; Usa - IFM DTC600 Notice De Montage

12 Approvals/standards

12.1 Radio approvals

12.1.1 Overview

The overview of the approval status of a device is available on our website at
www.ifm.com.

12.1.2 Europe

Use in all EU countries

12.1.3 USA

FCC not:
This device complies with Part 15 of the FCC Rules. For operation, the following
two conditions apply:
1. This device must not cause harmful interference, and
2. this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications made to this equipment not expressly approved by ifm
may void the FCC authorization to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.

12.1.4 Canada

IC note:
This unit complies with the licence-free Industry Canada RSS standards.
For operation, the following two conditions apply:
1. The device may not cause interference, and
2. the user of this device must accept any interference received, including
interference that may cause undesired operation.
16