Radio Equipment; Interference Of Electronic And Medical Devices; Functions And Features - IFM DTC600 Notice De Montage

● Only use the product for its intended purpose (→ 3 Functions and features).
● If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur.
● The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator.
● Installation, electrical connection, set-up, operation and maintenance of the
product must be carried out by qualified personnel authorised by the machine
operator.
● Protect units and cables against damage.

2.2 Radio equipment

In general, the device must not be used in the vicinity of petrol stations, fuel
depots, chemical plants or blasting operations.
► Do not transport and store any flammable gases, liquids or explosive
substances near the unit.

2.3 Interference of electronic and medical devices

Operation can affect the function of electronic devices that are not correctly
shielded.
► Disconnect the device in the vicinity of medical equipment.
► Contact the manufacturer of the corresponding device in case of any
interference.
Because of the requirements for electromagnetic interference emissions, the
device is intended for use in industrial environments. The device is not suitable for
use in domestic areas.
The device may only be used under the operating conditions specified in
the data sheet.

3 Functions and features

The DTC600 read/write head is used for non-contact reading and writing of RFID
tags that conform to the system. The data is transmitted via CAN bus.
UK
5