Preliminary Note; Symbols Used; Warnings Used; Safety Instructions - IFM DTC600 Notice De Montage

1 Preliminary note

Technical data, approvals, accessories and further information →
www.ifm.com.

1.1 Symbols used

► Instruction
→ Cross-reference
Important note
Non-compliance may result in malfunction or interference.
Information
Supplementary note

1.2 Warnings used

NOTE!
Type and source of the hazard
> Damage to property may result.
► Actions to refrain from.
► Measures to take.

2 Safety instructions

2.1 General

● The device described is a subcomponent for integration into a system.
- The manufacturer is responsible for the safety of the system.
- The system manufacturer undertakes to perform a risk assessment and to
create a documentation in accordance with legal and normative requirements
to be provided to the operator and user of the system. This documentation
must contain all necessary information and safety instructions for the operator,
the user and, if applicable, for any service personnel authorised by the
manufacturer of the system.
● Read this document before setting up the product and keep it during the entire
service life.
● The product must be suitable for the corresponding applications and
environmental conditions without any restrictions.
4