Avoiding Interference; Mechanical Design; Mounting Options - IFM DTC600 Notice De Montage

For positioning the ID tags the read/write heads are marked with an
antenna symbol on the active face. It designates the middle of the
integrated antenna coil and has to correspond with the middle of the ID tag.
The orientation of the read/write head axis must correspond with the axis of
the ID tag coil.

5.3 Avoiding interference

The device generates a modulated electrical field with a frequency of 13.56 MHz.
To avoid interference of the data communication no other devices generating
interference emission in this frequency band must be operated in its vicinity. Such
devices are for example frequency converters and switched-mode power supplies.

5.4 Mechanical design

Fig. 2: Mechanical design

5.5 Mounting options

For installation, the following optional accessories are available.
The unit can be mounted without the accessories. For installation, please
use the threaded sleeves on the back of the unit. The necessary screws are
not supplied with the unit.
1: Sensing face
1
2: Connections (can be rotated by 270°)
2
UK
7