Status
CAN LSS service active
CAN configuration error
CAN warning limit for
communication errors
reached
CAN status bus off
If the ID tag has a high receive signal strength, all LEDs of the signal bar
are on (configurable).
The max. receive signal strength depends on the type of the ID tag.
8 Operation
The device is operated in a CAN network.
The CAN network configuration must be correct to ensure that the device
functions reliably.
► Depending on the configuration of the CAN network, adjust the settings
of the CAN network under (→ 8.1).
More notes on operation can be found in the operating instructions:
www.ifm.com
8.1 CANopen
The device is delivered with the node ID 32 and a bit rate of 125 Kbits/s.
power LED
LED signal bar
(green)
(4x yellow)
-
-
-
-
-
-
-
-
LED CAN
LED CAN
status
status (red)
(green)
flashing
off
quickly
off
flashes
flashing
off
slowly
off
on
UK
13