Installation With Angle Bracket E80335; Installation With Mounting Device E80336 - IFM DTC600 Notice De Montage

5.5.1 Installation with angle bracket E80335

Fig. 3: Installation with angle bracket E80335

5.5.2 Installation with mounting device E80336

The mounting device is used to mount the unit to a clamp. The following clamps
can be used:
● E21110 with a rod diameter of 12 mm
● E20795 with a rod diameter of 14 mm
● E21109 with a rod diameter of 14 mm
Fig. 4: Installation with mounting device E80336
8