LiftMaster Elite Série Manuel D'installation page 32

DETERMINE AND SET WIRING TYPE (CONTINUED)
WIRING TYPE DEVICE
TS
This mode will
attempt to close
the door from any
position
except when fully
3-Button
closed, or when
Control Station
a safety input is
present.
The stop button
will not disable the
Timer-To-Close
at any
position. To disable
the Timer-To-Close
in this mode,
installation of
a defeat switch
is required (see
wiring
diagram).
Momentary contact
to open, close, and
stop with open
override and
Timer-To-Close.
Every device that
causes
door to open,
including a
reversing device,
activates the
Timer-To-Close.
Auxiliary controls
can be connected
3-Button
to open Remote Control
input to activate the
Programmed as
Timer-To-Close. If OPEN/CLOSE/STOP
the timer has been
activated, the open
button and radio
control can recycle
the
timer. The Timer-
To-Close will
function from the
programmable
mid stop with
this wiring type.
Compatible
Single Button
with 3-Button
Remote Control
Station, 1-Button
Station and 1 and
3-Button
Remote Control.
LiftMaster
Monitored
Single Button
Entrapment
Control Station
Protection (LMEP)
(Wired)
Device required.
MyQ
Programming
ACTION STATE
Operator at OPEN limit
Operator at CLOSE limit
OPEN button is pressed
Door opening
momentarily
Door closing
Door at Open Mid-Stop
Door stopped during open or close cycle
Operator at OPEN limit
Operator at CLOSE limit
CLOSE button is
Door opening
pressed
Door closing
momentarily
Door at Open Mid-Stop
Door stopped during open or close cycle
Operator at OPEN limit
Operator at CLOSE limit
STOP button is pressed
Door opening
momentarily
Door closing
Door at Open Mid-Stop
Door stopped during open or close cycle
Operator at OPEN limit
Operator at CLOSE limit
Door opening
OPEN button is held
(constant pressure)
Door closing
Door at Open Mid-Stop
Door stopped during open or close cycle
Operator at OPEN limit
Operator at CLOSE limit
CLOSE button is held
Door opening
(constant pressure)
Door closing
Door at Open Mid-Stop
Door stopped during open or close cycle
Operator at OPEN limit
Operator at CLOSE limit
Door opening
OPEN button is pressed
momentarily
Door closing
Door at Open Mid-Stop
Door stopped during open or close cycle
Operator at OPEN limit
Operator at CLOSE limit
CLOSE button is
Door opening
pressed
Door closing
momentarily
Door at Open Mid-Stop
Door stopped during open or close cycle
Operator at OPEN limit
Operator at CLOSE limit
Door opening
STOP button is pressed
momentarily
Door closing
Door at Open Mid-Stop
Door stopped during open or close cycle
Operator at OPEN limit
Operator at CLOSE limit
Door opening
Button is pressed
Door closing
Door at Open Mid-Stop
Door stopped during open or close cycle
Operator at OPEN limit
Operator at CLOSE limit
Door opening
Button is pressed: Door closing
Door at Open Mid-Stop
Door stopped during the open cycle
Door stopped during the close cycle
Operator at OPEN limit
Operator at CLOSE limit
Door opening
Door image is pressed:
Door closing
Door at Open Mid-Stop
Door stopped during open or close cycle
RESPONSE
No change in state
Door opens to closest OPEN limit or Mid-Stop
No change in state
Door will auto reverse to OPEN limit
Door opens to the OPEN limit
Door opens to the OPEN limit
Door closes to the CLOSE limit
No change in state
No change in state
No change in state
Door closes to the CLOSE limit
Door closes to the CLOSE limit
No change in state
No change in state
Door stops
Door stops
No change in state
Door stops
No change in state
Door opens to closest OPEN limit or Mid-Stop
No change in state
Door will auto reverse to OPEN limit
Door opens to the OPEN limit
Door opens to the OPEN limit
Door closes to the CLOSE limit
No change in state
No change in state
No change in state
Door closes to the CLOSE limit
Door closes to the CLOSE limit
No change in state
Door opens to closest OPEN limit or Mid-Stop
No change in state
Door will auto reverse to OPEN limit
Door opens to the OPEN limit
Door opens to the OPEN limit
Door closes to the CLOSE limit
No change in state
No change in state
No change in state
Door closes to the CLOSE limit
Door closes to the CLOSE limit
No change in state
No change in state
Door stops
Door stops
No change in state
Door stops
No change in state
Door opens to closest OPEN limit or Mid-Stop
No change in state
Door will auto reverse to OPEN limit
No change in state
Door opens to the OPEN limit
No change in state
Door opens to closest OPEN limit or Mid-Stop
No change in state
Door will auto reverse to OPEN limit
No change in state
Door opens to closest OPEN limit or Mid-Stop
Door opens to closest OPEN limit or Mid-Stop
Door closes to the CLOSE limit
Door opens to closest OPEN limit or Mid-Stop
No change in state
No change in state
Door closes to the CLOSE limit
Door closes to the CLOSE limit
32