Panasonic WV-CL930 Mode D'emploi page 13

r Put the cover on the ALC connector so
that the lens cable is secured to the rib.
c
Secure the camera mounting base
(option) to an installation position,
and mount the camera on the base.
• The mounting method of the camera
mounting base varies depending on the
material of the installation position.
Do not use wood screws or nails to
secure the camera mounting base.
• Steel products:
Secured with bolts and nuts
• Concrete wall:
Secured with anchor bolts or AY plug
bolts (M6 or M8) manufactured by
Matsushita
(Recommended
(M6): 5.0 N·m {3.7 lbf·ft}, recom-
mended tightening torque (M8): 6.2
N·m {4.6 lbf·ft}
• The mounting conditions of the camera
mounting base are described as follows:
Important:
• If the total weight of the camera and lens
exceeds 1 kg, use a housing to take
measures against camera drop.
Electric Works, Ltd.
tightening torque
Cover
Screws
(locally procured)
Lens cable
ALC connector
Camera mounting
base (option)
Screw
(locally procured)
13