IKRA GBFI 125 Manuel D'utilisation page 22

Petrol brushcutter GBFI 125
RATINGS
Model
Engine output
Engine type
Cubic capacity
Fuel
Tank volume
Maximum engine speed
Idling speed
Max. speed of the cutting tool
With 3-point blade
With line cutter head
Fuel consumption
Cutting diameter
Cord diameter
Overall cord length
Cord extension
Weight 1)
Noise Pressure Level L
L
Sound power level
WA
Vibration left handle
(EN ISO 11806:2011)
Vibration right handle
(EN ISO 11806:2011)
1) Weight as per standard ISO 11806-1 (without fuel, cutting devices and harness)
2) With 3-point blade
3) With line cutter head
Technical changes reserved.
WARNING: This machine's starter unit generates an average sized electromagnetic field, but it is not however
possible to exclude the possibility of interference on any active or passive medical devices that operators may be
wearing; this could be risky for their health conditions. All those using medical devices should always consult their
GP, or the device manufacturer, before using this machine.
WARNING: Always wear suitable clothing when using the machine. Your dealer can provide you with all the
information on themost suitable accident-prevention devices to guarantee your safety.
WARNING: Prolonged exposure to vibrations can cause injuries and neurovascular disorders (also called
"Renaud's syndrome" or "white hand"), especially to people suffering from circulation disorders. The symptoms can
regard the hands, wrists and fingers and are shown through loss of sensitivity, torpor, itching, pain and discolouring
of or structural changes to the skin. These effects can be worsened by low ambient temperatures and/or by gripping
the handgrips excessively tightly. If the symptoms occur, the length of time the machine is used must be reduced and
a doctor consulted.
When working with the device, a certain level of noise cannot be avoided. Noisy work should be scheduled for hours,
during which it is allowed by statute or other local regulations. Adhere to any applicable rest times and limit your work-
ing time to the necessary minimum time. For your personal protection and the protection of people nearby, suitable
hearing protection must be worn.
Noise emission information in accordance with the German Product Safety Act (ProdSG) and the EC Machine
Directive: the noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will require
noise protection (e.g. wearing of ear protectors).
Please do also consider any local regulations concerning noise protection!
(EN ISO 11806:2011)
pA
2)
3)
kW
cm³
lubricated petrol
ml
min -1
min -1
min -1
min -1
kg/h
cm
mm
m
kg
dB (A)
dB (A)
m/s 2
m/s
2
GB-5
GBFI 125
1,25
2-Takt
42,7
40:1
1000
10000
3000
6900
6400
0,63
43 (Blade = 25,5)
2,4
2 x 2
Tap'n go
7,7
95,4 [K= 3,0 dB(A)]
114
2
7,78 [K= 1,5 m/s ]
2
6,20
[K= 1,5 m/s ]