AEG AGN2141 Notice D'utilisation page 72

72 www.aeg.com
7.7 Door reversibility
2
2
4
3
2
180°
To change the opening direction of the
door, do these steps:
• Remove the plug from the power.
• Remove the ventilation grille. Remove
the filling and install it on the opposite
side of the grille.
1
• Lay down the appliance back side
down on a wooden support.
• Unscrew the lower hinge.
• Remove the door closure device from
the hinge and move the pin to the
other side. Re-screw the door closure
device provided within the accessory
bag on the opposite side.
• Remove the door closure device on
the door.
• Re-screw the door closure device pro-
vided within the accessory bag on the
opposite side.
1
• Remove the door.
• Unscrew and move the pin to the op-
posite side.
• Re-insert the door.
• Re-screw the lower hinge.
• Raise the appliance and install the
ventilation grille.
1
• Unscrew the handle. On the opposite
side remove the hole covers by driving
a 3-4 mm drift or drill into them.
• Install the handle. Fit the handle on to
the opposite side by turning it on half
circle.
• Install the hole covers provided within
the accessory bag.
• Put the cabinet in position.