Modifi Er Le Bar Offset - Fostex MR-8 MKII Manuel Utilisateur

By default, the bar/beat value at the beginning (ABS ZERO) of the song is set to "bar -2/beat 1".
This offset (the bar/beat value at ABS ZERO) is called "bar offset". You can change the default bar offset
to the desired value.
1) On the second page of the song editing
menu screen, highlight "Bar Offset" and
press the
The current offset value (by default, "-
2Bar") starts fl ashing.
The table below shows the available offset
values.
Option
Meaning
-8Bar
ABS Zero= bar -8
-7Bar ABS Zero= bar -7
ABS Zero = bar -6
-6Bar
-5Bar
ABS Zero= bar -5
-4Bar ABS Zero= bar -4
2) Rotate the JOG dial to select the desired off-
set value, and press the [MENU/ENTER]
key.
The selected offset value is confirmed,
To exit the menu mode, press the [STOP] key,
Manuel utilisateur MR-8mkII – Ch. 10 Fonction de Guide Rythmique
Modifi er le Bar Offset
[MENU/ENTER] key.
f l a s h -
Option Meaning
-3Bar
ABS Zero= bar -3
-2Bar
ABS Zero= bar -2
-1Bar ABS Zero= bar -1
0Bar ABS Zero= bar 1
f l a s h -
You can see the bar offset value on the home
screen when the recorder is at the beginning
of the song (ABS 0).
The screen example below shows the home
screen when the bar offset is set to "-4
The default home screen (bar offset = -2 bars).
The home screen when the
bar offset is set to "-4 bars".
81