Gprs Attach; External Device; Reset Settings; Sim Service - LG G7050 Mode D'emploi

Settings
Before you can use GPRS technology
• You need to subscribe to the GPRS service.
For availability and subscription to GPRS service, contact your
network operator or service provider.
• You need to save the GPRS settings for the applications used
over GPRS.

GPRS attach

If you select Power on and you are in a network that supports
GPRS, the phone registers to the GPRS network and sending short
messages will be done via GPRS. Also, starting an active packet
data connection, for example, to send and receive e-mail, is quicker.
If you select When needed, the phone will use a GPRS connection
only if you start an application or action that needs it. The GPRS
connection is closed after it is no longer required by any application.
Note
If there is no GPRS coverage and you have chosen Automatic,
the phone will periodically try to establish a connection.

External device

When you use Internet via GPRS by using external device, you can
set the following six profiles: Rename, APN, IP address, DNS,
User ID, and Password.

Reset settings

You can reset your phone to its default configuration.
To do so, proceed, as follows.
1. Select the Reset settings menu option.
2. Enter the 4-digit security code.
Note
The security code is preset to 0000.
To change this, refer to page 86.
88
(Menu 9.7.1)
(Menu 9.7.2)
Menu 9.8

SIM service

Your service provider can offer special application through SIM
card, such as home banking, stock market, etc. If you are
registered for one of these services, the service name will appear
at the end of the main menu. With the SIM service menu, your
phone is future-proof and will support additions to your service
provider's service. For further information, contact your service
provider.
Menu 10
89