LG G7050 Mode D'emploi page 74

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Fun & Tools
Voice recorder
You can record a memo. You can record up to 3 memos up to a
maximum of 30 seconds each.
You can play or delete the recorded memo or record new memo
using the left soft key [Option] key.
Note
In standby mode, you can go directly to the Voice recorder
menu by pressing the down navigation key.
Record
1. Press and hold down
key in standby mode.
2. Once recording is started, the message 'Recording...' and the
remaining time is displayed.
3. When you finish recording, press left soft key [Save].
Note
If all memo locations are full, you must delete an old memo
before recording a new one.
• Play: Allows you to play back all memos recorded, starting with
the most recent memo. The screen displays the Date and time
when the memo was recorded.
• Delete: Allows you to delete a specific memo.
• Record new: Allows you to record a memo.
• Delete all: Allows you to delete all memos. Press the left soft
key[Yes] to confirm.
View list
The phone shows the memo title which you have recorded by
pressing
in standby mode. You can Play, or Delete the
recorded memo.
46
Menu 3.6
Infrared
This feature allows you to send or receive data/fax through the
infrared port. To use an infrared connection:
• Install the modem driver for receiving or sending the data/fax.
• Install the network dial-up software supplied by your network
provider or fax application program for a fax call on your PC.
• Configure and activate an IrDA-compliant infrared port on your PC.
• Activate the infrared feature on the phone; the
on the right side at the bottom of the display.
• Call the network service number given to you by the service
provider.
If there is no communication between your phone and the
IrDA-compliant device within 30 seconds of activation of the
feature, it is automatically deactivated.
For further details, contact your network provider.
IrDA port
Note
PC Sync is a program for data exchange between PC and the
phone by a data cable. Therefore, if you want to use this
function, you need to buy the accessory kit. For more
information, you can use the PC Sync Help file on the CD.
Fun & Tools
Menu 3.7
symbol appears
IrDA port
47

Publicité

Chapitres

Table des Matières
loading

Table des Matières