LG G7050 Mode D'emploi page 92

Settings
• Voice tags are sensitive to background noise. Record them and
make calls in a quiet environment.
• When recording a voice tag or making a call by saying a voice
tag, the loudspeaker is in use. Hold the phone at a short distance
away from your mouth and face so that the proximity sensor does
not turn the loudspeaker off.
• Very short names are not accepted. Use long enough names and
avoid similar names for different numbers.
]
Automatic: Use this to enter voice-activated dialling mode
whenever you slide the keypad down.
]
Manual: Use this to enter voice-activated dialling mode by
holding the star[*/voice] key.
Note
You must say the name exactly as you said when you recorded
it. This may be difficult, for example, in a noisy environment or
during an emergency, so you should not rely solely upon
voice-activated dialling in all circumstances.
Auto redial
Select On, and your phone will make a maximum of five attempts
to connect the call after an unsuccessful call attempt.
Phone line in use
This function is only used if Two-line service is supported by
the Service Provider. Two independent phone numbers are
registered for the phone. This function provides you with the
selection the currently used phone number.
]
Line 1: Select Line 1 as the current phone number.
]
Line 2: Select Line 2 as the current phone number.
Note
If you select Line 2 in the area where alternative line service is
not supported, you can't make a call.
82
(Menu 9.4.7)
(Menu 9.4.8)
Closed user group
This is a network service that specifies the group of people who
you can call and who can call you. For more information, contact
your network operator or service provider. If a group index is
specified, it is used for all outgoing calls. If no group index is
specified, the network will use the preferential index.
(A specific index is stored in the network.)
]
Preset: Sets the selected CUG index.
]
On: You can edit the CUG index and activate it.
]
Off: Deletes the selected CUG.
Security settings
Various passwords are used to protect certain features of your
phone. Refer to page 21-22 for the various passwords.
PIN code request
When the PIN code request feature is enabled, you must enter
your PIN each time you switch the phone on. Consequently, any
person who does not have your PIN cannot use your phone without
your approval.
Note
Before disabling the PIN code request feature, you must enter
your PIN.
The following options are available:
• Enable: You must enter the PIN each time the phone is switched on.
• Disable: The phone connects directly to the network when you
switch it on.
Settings
(Menu 9.4.9)
Menu 9.5
(Menu 9.5.1)
83