LG G7050 Mode D'emploi page 62

Getting started
PIN2 code (4 to 8 digits)
G7050
The PIN2 code, supplied with some SIM cards, is required to
access functions such as Advice of Call Charge and Fixed
dial number. These functions are only available if supported by
your SIM card. Check with your network for further information.
PUK code (4 to 8 digits)
The PUK (PIN Unblocking Key) code is required to change a
blocked PIN code. The PUK code may be supplied with the SIM
card. If not, contact your network operator for the code. If you lose
the code, also contact your network operator.
PUK2 code (4 to 8 digits)
The PUK2 code, supplied with some SIM cards, is required to
change a blocked PIN2 code. If you lose the code, also contact
your network operator.
Security code (4 to 8 digits)
The security code protects the unauthorised use of your phone.
The default security code is set to '0000' and the security code is
required to delete all phone entries and to activate the Reset
settings menu. Also, the security code is required to enable or
disable the phone lock function to prevent unauthorised use of the
phone. The security code default setting can be modified from the
Security settings menu.
Barring password
The barring password is required when you use the Call barring
function. You obtain the password from your network operator
when you subscribe to this function. See page 85 for further details.
22