Introduction - Thermador Professional Série Manuel D'installation

Masquer les pouces Voir aussi pour Professional Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Introduction

This manual provides the proper installation instructions for
two styles of THERMADOR PROFESSIONAL
Hoods:
27" Pro Wall Hood models (PHxxGS), 27" (686mm) in
depth, with widths of 36" (914mm), 42" (1067mm), 48"
(1219mm), and 54" (1372mm). This model series
features brushed stainless-steel canopy with halogen
lamps and heat lamps (see Figure 1).
24" Pro Wall Hood models (PHxxHS), 24" (610mm) in
depth, with widths of 30" (762mm), 36" (914mm), and
48" (1219mm). This model series features brushed
stainless-steel canopy with halogen lamps (see
Figure 1).
All hoods require the choice of a Remote, Inline, or Integral
Blower. Use only THERMADOR
®
THERMADOR
ventilation hoods. All blower models are
sold separately. See Table 1, Blower & Circuit Breaker
Ratings, for recommended blowers. Contact Customer
Service for additional options.
B
LOWER
R
B
600 CFM
EMOTE
LOWER
R
B
1000 CFM
EMOTE
LOWER
R
B
1300 CFM
EMOTE
LOWER
I
B
600 CFM
NLINE
LOWER
I
B
1000 CFM
NLINE
LOWER
I
B
600 CFM
NTEGRAL
LOWER
I
B
1000 CFM
NTEGRAL
LOWER
Table 1: Blower & Circuit Breaker Ratings
* 20 Amp circuit breaker required when using the VTR1330E Remote Blower with a 27" Pro Wall Hood.
** 15 Amp circuit breaker required when using the VTR1330E Remote Blower with a 24" Pro Wall Hood.
When connected to a GFCI-protected supply, the Pro Hoods are suitable for use in damp locations that are protected from
outside weather conditions and not subject to saturation with water and other liquids, but can be subject to moderate
degrees of moisture. Refer to local codes, NEC/CEC, and or the Authority Having Jurisdiction (AHJ) for additional
information.
®
Series Wall
®
blowers with
SKU
VTR630D
VTR1030D
VTR1330E
VTI610D
VTI1010D
VTN630C
VTN1030C
All Hood models are rated for 120 VAC, see Table 1, for
circuit breaker ratings.
30", 36", 42", 48", 54"
(762, 914, 1067, 129, 1372mm)
24", 27"
(61mm, 686mm)
Figure 1: Pro 24" & 27" Wall Hoods
V
OLTAGE
CFM
(AC)
600
120
1000
120
1300
120
600
120
1000
120
600
120
1000
120
B
C
LOWER
IRCUIT
C
B
URRENT
REAKER
(AMPS)
(AMPS)
4.2
15
5.7
15
8.5
20* / 15**
4.2
15
5.7
15
2.7
15
5.4
15
English 1

Publicité

Table des Matières
loading

Table des Matières