Storage And Maintenance - Gima 32926 Notice D'utilisation

35
D. To stop reading memories, press
by Mode.
Erasing data
+
A. Press button to select User 1, 2, or 3.
B. Press MEM. button to enter Memory Mode.
C. Press and hold
be erased automatically.
D. To confirm the data in the selected user has been erased, press
MEM. button and no data should appear.
Note: Once deleted, your data can NOT be restored.

STORAGE AND MAINTENANCE

General Use
• Do not in any way twist the cuff.
• Do not press button if the cuff is not wrapped around the wrist.
• Do not drop the product and avoid any strong impacts.
Maintenance
• Use a piece of cloth with water or mild cleansing agent to wipe the device and dry it immediately with a dry
cloth.
• Do not use detergent or any strong chemicals to clean the device.
• Use only a dry cloth to wipe the cuff.
• Do not attempt to disassemble or change any parts of the monitor, including wrist cuff, due to substitution
of a component different from that supplied might result in measurement error.
• If any suggestion or service is requested, please consult your service station.
• Disinfection - Use a piece of cloth with 75% alcohol to wipe the surface of the cuff for 10 seconds.
• Make sure the cuff is completely dry before using.
• Only trained technicians are allowed to repair and dissemble the device, including software upgrades,
patches and maintenance.
Note
Water quality required for cleaning: Tap water.
button, and switch to Stand-
+
and buttons at the same time, the data will
ENGLISH