Storage & Maintenance - Gima 32786 Manuel De L'utilisateur

TROUBLESHOOTING
Problem
No display when you
press the Power /
Start button.
"Er P" displayed
"Er 1" displayed
"Er 2" displayed
"Err 3" displayed
Note: If your problem cannot be solved by the above, consult your store of pur-
chase. Do not disassemble the unit.
STORAGE & MAINTENANCE
- Keep away the unit from direct sunlight, extreme temperatures, humidity or mois-
ture.
- Use a dry, soft cloth to clean the unit, or if desired, use a cloth lightly dampened
with water.
- Do not use alcohol, benzene, thinner or other volatile liquids to clean the unit.
- Do not wash or expose the wrist cuff to liquid.
- Remove batteries from the unit when it will not be used for more than 3 months.
ENGLISH
Cause
Have the batteries run
out?
Are the battery polarities
wrong?
Fail to inflate.
Deflate too rapidly.
Movement during
measurement.
Signal interference.
Incorrect results.
Solution
Replace new batteries.
Re-align batteries in correct
polarities.
Check if the cuff is properly
connected. Replace the air
tube if it is broken.
Return for servicing.
Do not move during
measurement.
Remove interfering source
e.g. mobile phones,
magnets.
Measure again.
16